Thermal transfer analysis of tubes with extended surface with fractal design

Luis Eduardo Llano-Sánchez, Darío Manuel Domínguez-Cajeli, Luis Carlos Ruiz-Cárdenas

Abstract


Heat exchangers are formed by tubes with extended surfaces that improve the transfer of heat between two media (e.g., a solid and a liquid in motion). This paper presents the design of an extended surface tube with fractal geometry, corresponding to the Koch snowflake and the Cesaro curve. For the design, we used the CAD computational tool, and afterwards we performed the CAE finite element analysis and verified the thermal behavior of the designed tube. We were able to reduce the heat transfer time and increase the heat flow in the system in the following manner: for smooth tube, 250 W/m2; for Koch surface, 500 W/m2; for six fins, 1450 W/m2; and for Cesaro curve, 3600 W/m2. These results demonstrate the limits of the design and the advantages of its implementation in machinery such as condensers, heat exchangers, and boilers.


Keywords


boilers; Cesaro curve; finite elements; fractal design; heat transfer; Koch Snowflake; tubes with extended surface

Full Text:

PDF

References


R. Senthilkumar, S. Prabhu, and M. Cheralathan, “Experimental investigation on carbon nano tubes coated brass rectangular extended surfaces,” Applied Thermal Engineering, vol. 50(1), pp. 1361-1368, Jan. 2013. DOI: DOI: http://doi.org/10.1016/j.applthermaleng.2012.05.040.

S. W. Chang, W. L. Cai, and R. S. Syu, “Heat transfer and pressure drop measurements for tubes fitted with twin and four twisted fins on rod,” Experimental Thermal and Fluid Science, vol. 74, pp. 220-234, Jun. 2016. DOI: DOI: http://doi.org/10.1016/j.expthermflusci.2016.01.001.

B. Niezgoda – Zelasko, and J. Zelasko, “Refrigerant boiling at low heat flux in vertical tubes with heat transfer enhancing fittings,” International Journal of Refrigeration, vol. 54, pp. 151-169, Jun. 2015. DOI: http://doi.org/10.1016/j.ijrefrig.2015.03.007.

E. Gkanas, and Makridis, “Effective thermal management of a cylindrical MgH2 tank including thermal coupling with an operating SOFC and the usage of extended surfaces during the dehydrogenation process,” International Journal of Hydrogen Energy, vol. 41(13), pp. 5693-5708, Apr. 2016. DOI: http://doi.org/10.1016/j.ijhydene.2016.01.165.

H. W. Carpenter, and R. G. Reid, “The response of layered anisotropic tubes to centrifugal loading,” Composite Structures, vol. 139, pp. 141-150, Apr. 2016. DOI: http://doi.org/10.1016/j.compstruct.2015.11.071.

K. Yang, S. Xu, J. Shen, S. Zhou, and Y. M. Xie, “Energy absorption of thin-walled tubes with pre-folded origami patterns: Numerical simulation and experimental verification,” Thin-Walled Structures, vol. 103, pp. 33-44, Jun. 2016. DOI: http://doi.org/10.1016/j.tws.2016.02.007.

R. Romero-Méndez, P. Lara-Vázquez, F. Oviedo-Tolentino, H. M. Duran-Garcia, F. G. Pérez-Gutiérrez, and A. Pacheco-Vega, “Use of Artificial Neural Networks for Prediction of the Convective Heat Transfer Coefficient in Evaporative Mini-Tubes,” Ingeniería, Investigación y Tecnología, vol. 17(1), pp. 23-34, Jan. 2016. DOI: http://doi.org/10.1016/j.riit.2016.01.003.

S. Jedari Salami, “Extended high order sandwich panel theory for bending analysis of sandwich beams with carbon nanotube reinforced face sheets,” Physica E: Low-dimensional Systems and Nanostructures, vol. 76, pp. 187-197, Feb. 2016. DOI: http://doi.org/10.1016/j.physe.2015.10.015.

S. Rimza, K. Satpathy, S. Khirwadkar, and K. Velusamy, “Optimal design of divertor heat sink with different geometric configurations of sectorial extended surfaces,” Fusion Engineering and Design, vol. 100, pp. 581-595, Nov. 2015. DOI: http://doi.org/10.1016/j.fusengdes.2015.08.008.

B. Anoop, C. Balaji, Velusamu, and K. Velusamy, “A characteristic correlation for heat transfer over serrated finned tubes,” Annals of Nuclear Energy, vol. 85, pp. 1052-1065, Nov. 2015. DOI: http://doi.org/10.1016/j.anucene.2015.07.025.

P. A. Di Maio, P. Arena, G. Bongiovi, P. Chiovaro, A. del Nevo, and R. Forte, “Optimization of the breeder zone cooling tubes of the DEMO Water-Cooled Lithium Lead breeding blanket,” Fusion Engineering and Design, vol. 109-111(A), pp. 227-231, Nov. 2016. DOI: http://doi.org/10.1016/j.fusengdes.2016.03.021.

S. Mirfendereski, A. Abbassi, and M. Saffar - Avval, “Experimental and numerical investigation of nanofluid heat transfer in helically coiled tubes at constant wall heat flux,” Advanced Powder Technology, vol. 26(5), pp. 1483-1494, Sep. 2015. DOI: http://doi.org/10.1016/j.apt.2015.08.006.

D. J. Kukulka, and R. Smith, “Thermal-hydraulic performance of Vipertex 1EHT enhanced heat transfer tubes,” Applied Thermal Engineering, vol. 61(1), pp. 60-66, Oct. 2013. DOI: http://doi.org/10.1016/j.applthermaleng.2012.12.037.

J. Yan, Q. Bi, G. Zhu, L. Cai, Q. Yuan, and H. Lv, “Critical heat flux of highly subcooled water flow boiling in circular tubes with and without internal twisted tapes under high mass fluxes,” International Journal of Heat and Mass Transfer, vol. 95, pp. 606-619, Apr. 2016. DOI: http://doi.org/10.1016/j.ijheatmasstransfer.2015.12.024.

J. Yan, Q. Bi, L. Cai, G. Zhu, and Q. Yuan, “Subcooled flow boiling heat transfer of water in circular tubes with twisted-tape inserts under high heat fluxes,” Experimental Thermal and Fluid Science, vol. 68, pp. 11-21, Nov. 2015. DOI: http://doi.org/10.1016/j.expthermflusci.2015.04.003.

B. Li, X. Han, Z. Wan, X. Wang, and Y. Tang, “Influence of ultrasound on heat transfer of copper tubes with different surface characteristics in sub-cooled boiling,” Applied Thermal Engineering, vol. 92, pp. 93-103, Jan. 2016. DOI: http://doi.org/10.1016/j.applthermaleng.2015.09.069.

V. Garcia-Morales, “Fractal surfaces from simple arithmetic operations,” Physica A: Statistical Mechanics and its Applications, vol. 447, pp. 535-544, Apr. 2016. DOI: http://doi.org/10.1016/j.physa.2015.12.028.

I. M. Rian, and S. Asayama, “Computational Design of a nature-inspired architectural structure using the concepts of self-similar and random fractals,” Automation in Construction, vol. 66, pp. 43-58, Jun. 2016. DOI: http://doi.org/10.1016/j.autcon.2016.03.010.

H. Khezrzadeh, “Overall properties of particulate composites with fractal distribution of fibers,” Mechanics of Materials, vol. 96, pp. 1-11, May. 2016. DOI: http://doi.org/10.1016/j.mechmat.2016.01.014.

G. Pia, L. Casnedi, R. Ricciu, L. A. Besalduch, O. Cocco, A. Murru, Paola Meloni, and U. Sanna, “Thermal properties of porous stones in cultural heritage: Experimental findings and predictions using an intermingled fractal units model,” Energy and Buildings, vol. 118, pp. 232-239, Apr. 2016. DOI: http://doi.org/10.1016/j.enbuild.2016.03.011.

N. Nagarani, K. Mayilsamy, A. Murugesan, and G. Sathesh Kumar, “Review of utilization of extended surfaces in heat transfer problems,” Renewable and Sustainable Energy Reviews, vol. 29, pp. 604-613, Jan. 2014. DOI: http://doi.org/10.1016/j.rser.2013.08.068.

M. L. Lapidus, and R. G. Niemeyer, “Towards the Koch Snowflake Fractal Billard: Computer Experiments and Mathematical Conjectures,” Contemporary Mathematics, vol. 517, pp. 231-265, Jan. 2010. DOI: http://doi.org/10.1090/conm/517/1014.




DOI: https://doi.org/10.19053/01211129.v27.n47.2018.7749

Article Metrics

Abstract Views
206




Metrics Loading ...
_

Refbacks

  • There are currently no refbacks.




Copyright (c) 2018 Revista Facultad de Ingeniería

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

__________________________________________________________________________________________________________________

Revista Facultad de Ingeniería (Rev. Fac. Ing.) - ISSN: 0121-1129 - ISSN: 2357-5328 (Online)

Indexed and registered by: Emerging Sources Citation IndexSciELORedalycPublindex(Categoría A2)REDIBDOAJDialnetSHERPA/RoMEOLatindex.

__________________________________________________________________________________________________________________

__________________________________________________________________________________________________________________

Licencia de Creative Commons

This work is licensed under a Creative Commons Attribution 4.0 International

UNIVERSIDAD PEDAGÓGICA Y TECNOLÓGICA DE COLOMBIA
Sede Central Tunja–Boyacá–Colombia
Avenida Central del Norte 39-115
PBX: (57+8) 7405626
portalweb@uptc.edu.co Comentarios de este sitio
Horario de atención y servicio telefónico
8:00 a.m. a 12:00 m y 2:00 p.m a 6:00 p.m.

Atención al Ciudadano
Línea Gratuita: 01 8000 942024
Tel: (57+8) 7428263
quejas.reclamos@uptc.edu.co
Notificaciones Judiciales
Notificaciones de aviso

Institución de Educación Superior sujeta a inspección y vigilancia por el Ministerio de Educación Nacional
Sistema OJS - Metabiblioteca |